Keeping Indoor Air Temperatures Balanced in Your Home
As a homeowner, you know that it’s important to maintain comfortable indoor temperatures during the winter. This can be a bit difficult sometimes, especially if you go to a different room and notice that the air is much colder than in the rest of your house. For instance, you might find your basement to be much chillier than the ground level of your home, even to the point that you have to put on a coat just to venture downstairs.
Having different air temperatures around the house happens to a lot of homeowners. Knowing how to deal with this can help you achieve proper air balance in each room of your home so you can stay warm and comfortable. As such, reputable heating and AC repair specialist Armored Heating and Cooling Inc. shares some useful tips here:
Offset your thermostats. If you have two different zones in your HVAC system, with one setting for downstairs and another for upstairs, try offsetting them by two degrees. This means raising or lowering the temperature upstairs by two degrees to help balance out the temperature downstairs.
Check your air supply and return registers. Sometimes a closed air register is what’s causing some of your rooms to have lower temperatures. These look like vents with a lever that opens or closes the register. If an air register is closed, this prevents heat from entering the room and won’t be affected by the changes you make on your thermostat.
Meanwhile, your air return registers look similar to your supply registers, except they’re larger and don’t have a lever. They need to be cleared of any drapery, clutter or furniture to function properly. If this isn’t possible due to the layout of your home, purchase a deflector that can redirect the air out from underneath your furniture. Vacuuming your air return registers regularly also helps prevent dust buildup.
You don’t have to completely close or open your air registers. Set the thermostat at a comfortable temperature and then determine which areas in your home are too hot or cold. Partially close or open the vents in these areas until you reach a good balance that’s comfortable throughout your home.
Have your ductwork checked. Sometimes you’ll get leaks from the ducts in your home, which can cause low airflow between certain rooms. If there’s a leak somewhere in your ductwork, you’ll consistently have a hard time balancing the air temperature in your home.
The best way to address this issue is to call in a trusted heating and AC repair technician to take a look. They’ll be able to check your ducts for loose joints and lack of insulation, as well as determine whether they have too many sharp turns. They’ll also address any leaks they find. If the airflow is too slow to return in your current ducts, then consider adding a second return duct to lower the pressure and help balance out the air in your home.
Check your air filters. This is a good practice that’s essential in keeping your HVAC system running smoothly at all times, as it’s simple enough to do on your own. This also increases the efficiency of the unit and extends the lifespan of your system. It will even save you a few dollars on your utility bills.
Create different zones. If you haven’t created different zones already, then doing so now is much better than trying to control your entire home with one thermostat. You can split your house up into multiple zones, each with its own thermostat. This will help you warm up those chilly parts of your home and cool down areas that are normally sweltering. Just be sure to have a trusted air conditioning and furnace repair technician install and calibrate the thermostats for you.
Having different zones is also a great way to control airflow and balance the temperature in your house. For instance, if your basement is a few degrees colder than your main level, adding another thermostat that just controls the lower level and setting it to a higher temperature will help eliminate cold or hot spots in your house. This allows you to be more comfortable in any room.
Using a zoning system also helps you save more money and energy. By setting different temperatures for different rooms, you can lower your system output in the areas of your home you don’t use as much.
Install ceiling fans. Sometimes it’s hard for your HVAC system to circulate air through large rooms, especially if they have high ceilings. If you have rooms that tend to be colder in the winter, this doesn’t mean your system isn’t working. They may just need additional help. This is where ceiling fans come in handy.
Hire a furnace repair and replacement contractor to install ceiling fans in your rooms to help circulate both heat and air conditioning, and you’ll see how much you’ll save on energy consumption. In fact, according to the Department of Energy, a ceiling fan will allow you to raise your air conditioner’s thermostat by 4°F without changing your comfort level.
Use your thermostat and blower fan. You can also turn the thermostat fan on to regulate the temperature faster. You can even change the system’s blower fan speed on your own if you follow your unit’s manual. This means your unit will constantly blow and keep the air supply indoors steady and balanced in your home, though this will also increase your utility bill.
Check your insulation. There’s a chance that you may have insulation issues in your walls, attic or even around your ductwork. If you’re not sure whether you have sufficient insulation, you can always consult with a trusted air conditioning and heating installation professional and have them check your home.
Upgrade your HVAC system. If you’re planning to upgrade your current system, take this as an opportunity to find the right type of unit for your home. While your current one may have done the job when it was still newly installed, choosing the same model isn’t always advisable, as your family’s need for temperature-controlled air may have changed over the years, whether you’re aware of it or not.
Keep in mind that different HVAC systems are made for different types of homes. You’ll need something that’s the right size for your own home based on the number of residents, square footage, number of stories and so on. Make sure to consult with a trusted professional to help you choose the HVAC system that’s most appropriate for your home.
As a locally-trusted air conditioning and heating installation contractor in the area, Armored Heating and Cooling Inc. offers quality service that you can rely on. Call us today at (317) 890-1566 or schedule an appointment online.